UFSx - Универсальный сервисный бокс поддерживающий основные бренды: Nokia, Sony Ericsson, Samsung, Motorola, Siemens, Lg2g, Lg3g, Sharp... (более 1000 моделей)
Разлочка, флеширование, восстановление, сервисные функции
HWK - Обновление для UFSx, Tornado, Twister, (SarasSoft) боксов
Прошивка, разблокировка, восстановление ПО, сервисные функции ...
Добавляет поддержку:
DCTxBB5
V 2.1.0.1
-----------
1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.
V 2.1.0.0
-----------
1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM-578,
RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,
2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.
V 2.0.9.0
-----------
1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)
V 2.0.8.5
-----------
1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.
V 2.0.8.4
-----------
1. Added info about flashed Certificates for BB5.
2. Corrected DCT4+ unlock error messages.
3. Find Product settings by VPL files.
4. New BB5 product RM-458 (6208c)
V 2.0.8.3
-----------
1. New BB5 products: RM-495,RM-496 (5130c-2,5130c-2b)
2. New DCT4+ products: RH-121,RH-122 (1661-2b,1661-2)
3. New DCT4+ UNL versions support:
1202-2,1202-2b (RH-111,RH-112 v3.00, v3.10)
1661-2 (RH-122 v3.10)
2610,2610b (RH-86,RH-87 v7.11)
2680s-2,2680s-2b (RM-392,RM-393 v4.56, v4.91)
5000d-2,5000d-2b (RH-362,RH-363 v3.50, v3.54)
7070d-2 (RH-116 v6.20)
4. Simlock status detail info for DCT4 and BB5 models added.
V 2.0.8.2
-----------
1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.
V 2.0.8.0
-----------
1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c,6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145
V 2.0.7.2
-----------
1. New DCT4+ versions support:
1208b(RH-100 v5.06)2600c(RM-340 v561)
V 2.0.7.1
-----------
1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"
V 2.0.7.0
-----------
1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.
V 2.0.6.0
-----------
1. Dual Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Last Flash Update pack (7.40.35.29728) support.
5. Support of Muxed Nand.
V 2.0.5.4
-----------
1. Display of MasterCode for DCTx, WD2 phones (CUI phones not supported)
V 2.0.5.3
-----------
1. Modified BB5 codes enter, to allow unlock "Counter Expired".
V 2.0.5.2
-----------
1. Added BB5 files integrity check, while flashing.
2. Fixed some minor bugs in "Init SimLocks".
3. Added Dejan solution for BB5 ("Locks")
V 2.0.5.1
-----------
1. Revised "Init SimLocks" function, now allows direct unlock of
1600(RH-64,RH-65)and other models.
V 2.0.5.0
-----------
1. New BB5 products: RM-101,RM-188,RM-208,RM-260 (N92-2,6086,E65-1,6086b)
2. New DCT4 products: RH-94,RH-95,RH-97,RH-98,RM-225.RM-229
(1112,1112i,6060v,6061,6030b,6030)
3. New CDMA products: RH-71,RH-77,RH-89,RM-121(2125,2126i,2118,2115i,2355)
4. New CDMA TIKU products:
RM-41,RM59,RM-60,RM61,RM-66,RM-124,RM-125,RM-154,RM-193
(3155,3155i,6155,6235,6236i,3152,6265,6265i,2855,6165,6275,2865)
5. Support of new Flash update pack 7.4.13.26017, new Flash chips added.
6. Improved F-Bus polling, fixed "Bad Resp UFSx" after fatal error.
7. Improved diagnostics of "Dead APE" and not recognized Flash chips.
8. Fixed "Patch" option bug.
9. UDA(CP) flashing for RM84,RM99 (N70-1,N70-5)
10.Self Tests monitor introduced.
11.Unlock of DCT4+ (BB4.1 ASIC 2 & 11) phones.
12.Certificates backup for BB5 phones introduced ("Rd Cert"and"Bk.308"for SL_Data)
13.BB5 File System Format introduced.
14.Windows Vista(tm) 32bit OS support.
V 2.0.4.2
-----------
1. New BB5 products: RM217,RM222 (6300,6300b)
2. PM Write: cofirmation to overwrite security PM data (21,120,208,308)
V 2.0.4.1
-----------
1. New BB5 products: RM198,RM216 (6085,6131NFC)
2. Firmware Downgrade option for BB5 phones.
3. Fixed APE bug in COR files flashing.
V 2.0.4
-----------
1. New BB5 products:
RM43R,RM100,RM140,RM146,RM147,RM158R,RM174,RM181,RM209,RM291
(N91-2,N92-1,7390,5300,5300b,N91-6,5200,5200b,7373,2626) introduced.
2. RM170,RM171(E50-1,E50-2) fixed.
V 2.0.3
-----------
1. New Flash update bundle support (6.35.036)
2. Fixed bug in MM_Erase RM-165 (8800d)
V 2.0.2
-----------
1. New BB5 products:
RM67,RM86,RM87,RM106,RM112,RM123,RM132,RM133,RM145,RM199,RM200
(N71-1,6136,5500d,5500,N71-5,6233,N73-5,N73-1,6234,6136b,6151) introduced.
2. New DCT4 ASIC support added.
3. New DCT4 products RH86,RM165 (2610,8800 Sirocco)
4. Fixed VPP control.
5. Fixed support of new Flash update packs.
6. Fixed minor bugs.
V 2.0.1
-----------
1. Corrections to handle 64->128 conversion for new softwares.
2. New flash chips supported (Amd,Spansion,Intel,ST)
3. Bugs in PM_Edit fixed.
4. 64->128 conversion for BB5 phones.
5. New BB5 GSM products: RM10,RM24,RM89,RM180 (E70-1,E70-2,E61-1,N72-5)
v 2.0.0 (v1.4_f)
-----------
1. New BB5 GSM products:
RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126
(E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products:
RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161,RM162,
RM166,RM167,RM189
(1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112,6103,6102i,
6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.
v1.4_e
-----------
1. New BB5 GSM product: RM-70 (7370) introduced.
v1.4_d
-----------
1. New BB5 GSM products: RM-38,RM-56 (3250,6270) introduced.
2. Converter from 64K to 128Kb Paged CNT Files.
3. New products: RM-111,RM-127 (7380,7360)
4. PPM and CNT FILE_MM_TYPE report added (to handle a 6230i, new HWID phones)
v1.4_c
-----------
1. New products: RH-33, RH-73, RH-74, RM-82 (7200b,6060,6061,6111)
2. Corrected unlock problem for: RH-64, RH-70, RH-75.
3. Patcher for DCT4 ASIC2 products (for HWK , use only *.pat files)
4. Auto Selection of 64k and 128k CNT FAT Images.
v1.4_b
-----------
1. New ST flash chip M36L0R7040 (6030 problem)
2. Erase files flashing fixed.
3. MM Partition recreation for RM13,RM14,RM72,RM73,RM-82.
v1.4_a
------------
1. Initial release.
Samsung
V 2.1.0.0
------
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722,B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110,S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E1100H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827,A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H,S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T929,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S5230,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.
V 2.0.9.0
------
TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z540
V 2.0.8.5
------
TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)
V 2.0.8.4
------
TRIDENT
B100M added (DUNL,IM,FL)
TRIDENT VISION
B310R added (CUNL,FL)
SWIFT-AEROFONE
E1070,E1100T,E1125 added (DUNL,IM,FL)
QUALCOMM
Increased Comms speed on RJ45 interface.
UNLOCK and UNFREEZE added for these models:
L810,L811
(Use [QCDI Info] button to readout keys)
V 2.0.8.3
------
TRIDENT
C275L,C500L,C506,C510L,C516,E570L,U106 added (DUNL,IM,FL)
TRIDENT VISION
B520B,M310L added (CUNL,FL)
OM(SYSOL)
C145,C161,C168B,M140L added (DUNL,IM,FL,SECT)
SWIFT
C3610C,E200B,E230L,E251L,F270L,F275L,F480L,J700L,P906,U900L
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130L,E1110(Euro and Asia),E1110C,E1117,E1117L
added (DUNL,IM,FL,SECT)
Increased flashing speed.
QUALCOMM
G400L,M8800B,V820L added.
UNLOCK and UNFREEZE added for these models:
G400,G400F,G400L,Z150
(Use [QCDI Info] button to readout keys)
V 2.0.8.2
------
TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.
V 2.0.8.1
------
TRIDENT
CC01,P258,U600G added (DUNL,IM,FL)
TRIDENT VISION
B220,B310,B320,B518,B520,B528,J600G,J610,J618,M318,M620,M628
added (CUNL,FL)
L320 added (DUNL,IM,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
B110 added (DUNL,IM,FL,SECT)
SWIFT
D618,D980,E2510,F250L,F268,F278,G600G,G618,J770,J808E,L258,M150,
M200,M3200,M3510,S3600,T429,U708E,U808E added(DUNL,IM,FL,SECT)
D780,D788,D880,D888,D980 SLAVE support added (DUNL,IM,SECT)
J150 fixed (DUNL,IM,SECT)
IM Rebuild added and RAW TFS Read fixed for these models:
D618,D780,D788,D880,D888,D900i,D908i,D980,E200,E208,E250,
E250D,E250V,E256,E258,E258D,E251,E251C,E480,E488,E590,E598,
E740,E747,E830,E838,E2510,F110,F250,F250L,F258,F268,F278,G600,
G608,G808E,G618,J150,J210,J700,J708,J770,J808E,L258,L310,L600,
L608,M150,M200,M610,M618,M3200,M3510,P180,P260,S3600,T429,U708E,
U808E,U908E (Need power up phone with battery after IM done !)
SWIFT-AEROFONE
B130,B130S,B130T added (DUNL,IM,FL,SECT)
SWIFT-3G
B2700,J800,L700,L708 introduced (DUNL,FL,SECT,BT)
SKYWORKS
C100 - 'Not Released Yet' bug fixed.
QUALCOMM
F480G,F480H,M7500,M8800,S7330,U900F,U900G,U900K added(FL,INF,REUL)
Added QualComm mode support:
(*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB)
(*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45)
QCDI Info, NVM Read, RAM Read added.
UNLOCK and UNFREEZE introduced for these models:
F480x,L760x,U900x,Z240 (Use [QCDI Info] button to readout keys)
COMMON
Stop button added.
User interface localisation.
V 2.0.8.0
------
TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520,U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737,A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700,G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L760,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819,U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V708,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.
V 2.0.7.2
------
TRIDENT
B100,B108,B200,B300,S710i added (DUNL,IM,FL)
B100,U600,U600B MSL Repair introduced.
OM(SYSOL)
C420,C420L,C421,C425,C426,X560,X560L,X566
added (DUNL,IM,FL,SECT)
SWIFT
E747.F250,F258,J700 added (DUNL,FL,SECT)
Chinese FOTA products E838, J708 flashing.
COMMON INFO
Product filter added.
V 2.0.7.0
------
TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.
V 2.0.6.0
------
COMMON
Remaked user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.
V 2.0.5.7
------
TRIDENT
C520,M300,M600,X526 added.
V 2.0.5.5
------
TRIDENT
E840,F300,F308,U100,U108 added.
Full Reset(*2767*3855#)is mandatory after flashing !
If make Asia<>EU change, use *2767*3855# before flashing.
SWIFT
D900i,D908i,E200,E208,E390,E398,E590,E740,E830,E838 added.
V 2.0.5.4
------
TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct
codes for new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8xx,.)
IMEI challenger implemented, allows rebuild IMEI for new models.
V 2.0.5.0
------
COMMON
Windows Vista(tm) 32bit OS support.
Cut Power option (Restart - power on mobile)
TRIDENT
C140,C216,C240,C250,C260,C266,C268,C308,P310,P318,X166,X636 added.
MSL1 bypass, allows direct unlock.
OM635x
E635 added.
SWIFT
E256,E376,E480,E488,E736,E750,E758 added.
E25x direct unlock.
Full TFS Read, TFS editor.
Option to exclude E2P part from read MCU image.
V 2.0.4.2
------
COMMON
Cables description added.
TRIDENT
MVN CTS flashing fixed (X830 'Unknown File System' error)
FDI CTS flashing fixed (E570,X630,X680 Empty folders)
Full Reset (*2767*3855#) is mandatory after CTS flashing !
X838 added.
V 2.0.4
------
TRIDENT
C300,D830,D836,D838,D840,D848,E570,E906,S401i,X156,X160,
X160b,X168,X461,X481,X510,X518,X520,X530,X680N,X810,X818,
X830 added (Unlock works with battery only !)
SWIFT
E250,E258,E500,E780,E786,E788 added.
Direct unlock for new models (D900,D820...)
OM635x
E420,E428 added.
X65x - Unlock E2P feature added.
S50x - Fixed "Full" flashing bug, E2P R/W added.
V 2.0.3
------
TRIDENT
I300,I308,I320,X680,X688 added.
CTS flashing (D520,D528,X680,X688)
SWIFT
E370,E378,E380,E388 added.
Introduced Unlock E2P for MSL phones (D820,D900...)
Read E2P shows info (IMEI, Lock Status, Unlock Codes)
V 2.0.2
------
COMMON
Introduced E2P Read/Write. Allows easy backup/edit E2P
areas to repair or rebuild CAL data for new models.(IMEI, Locks,..)
TRIDENT
C130,E900,E908,S500i,X210,X218,X500,X508,X630,X638,X820,
X828 added (Unlock works with battery only)
CTS flashing (E900,E908,X630,X638,X820,X828)
SWIFT
D900,D908,X670,X678 added.
Corrected problems with TFS read.
NOR Erase.
Direct unlock for older models.
OM635x
X650,X658 added.
NOR Erase.
V 2.0.1
------
TRIDENT
S400i added (Unlock works with battery only)
SWIFT
E360,E368 added.
v 2.0.0 (v1.4_y)
------
TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308,
X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.
v1.4_x
------
TRIDENT
D720,D730,X660,X668,X800,X808 added.
OM635x
X490 added.
SWIFT
X700 added.
v1.4_w
------
TRIDENT
E568,S410i,X150,X200,X208 added.
BT Address Change.
OM635x
E108,E330N,E335,X495,X497,X628 added.
SWIFT
D500E,D600E,D608,E340E,E348,E350E,E358 added.
M46
Models revised.
v1.4_v
------
TRIDENT
X140 added.
NAND Erase (E530,E720,E728) to fix "Blinking LCD"
Read Flash - custom address range support.
OM6359
X620 added.
SWIFT
D600 support added for HWK customers.
v1.4_u
------
COMMON
Minor Bugs fixed.
v1.4_t
------
TRIDENT
E530,E620,E728 added.
Individual BaudRate storage for each model in INI file.
SWIFT
E340,E350,E640,E648,E730,E738 added for HWK customers.
v1.4_s
------
TRIDENT
C210,C230 fixed.
v1.4_r
------
COMMON
OM platforms flashing bug fixed.
Added new FLASH chips geometry and signatures.
Ini file creation wizard for super-novice users.
TRIDENT
New products added:
C210,C230,E315,E316,E610,E720,E850,X480.
OM6359
New product added: X640.
SWIFT
D508 support added for HWK customers.
v1.4_q
------
SWIFT
D500 support added for HWK customers.
TRIDENT
New products added: S341i, S342i.
OM6357
E630 flashing bug fixed.
TFS 'spaced' filenames bug fixed.
v1.4_p
------
TRIDENT
C200 "Unknown Metrics" fixed for Fujitsu Flash chips.
v1.4_o
------
COMMON
Xprotector removed.
v1.4_n
------
COMMON
*.zip included to filter.
TRIDENT
New products added:
C200,E300,E318,E718,P730,P738,X120,X426,X438,X458.
OM6357
New products added:
E330,E338,E630,E638,E808,X108,X460,X468.
v1.4_m
------
Minor bugs fixed.
v1.4_l
------
OM6357
S500, S508 support.
v1.4_k
------
COMMON
Updated INI file structure.
Some minor and major bugs.
TRIDENT
TEST mode problems, without battery.
2nd Boot Error.
E710 TONES problem.
"Protect Reserved Regions" now works properly.
OM6357
E800/E820 models support.
Show all possible unlock codes.
Auto Format NAND before flashing.
Read TFS for E800/E820 (for educational purposes)
ONE-C
Bug with "New Flash Layout" mode.
SkyWorks
P510 model support.
IMEI Rebuild.
v1.4_j
------
Canceled.
v1.4_h
------
COMMON
Auto-Scroll Result window.
Save/Load settings to INI file.
Counter works now.
Fixed some bugs.
TRIDENT
New products added D410, D418, E600, E608.
OM6357
TFS flashing added.
NAND format added.
IMEI Rebuid added.
Reset MMI added.
Fixed TAT mode for some SW versions.
Более подробную информацию о продукте можно узнать здесь : www.ufsxsupport.com